This only works if the first method completed far enough to allow you into the Stock Recovery or if the Alternative Methods worked and you now need to install the correct firmware. Then hold down the Power and Home buttons to turn the device on again. Then there is always the Frisbee option. You should shut down as many background applications and close as many folders as you can before trying this method. I tried leaving it on charge for an hour or so but the measured voltage off the battery never really improved by much and the tab didn't want to turn on unless plugged in.
Amlogic provides a flash tool to reload the firmware on these devices from a desktop pc. So I manually turned it on and I got the green robot+'Ainol'. In my mediafire account I've provided recovery images and zip packages with the same files in the recovery images for the Batch 1 and Batch 2 Crystals. This could be down to how I was bridging the pins, but it was more successful if I prepared the card from fresh every time before another attempt. For the M3 I found some schematic with the boot options. It will restart when finished.
I appreciate your help with this btw. I wonder if this tab has suffered some sort of mechanical short or there is something which is causing a high electrical resistance somewhere and hence the heat build up. All I can say this worked 100% for me. Using a thumbtack or other similar metal object, bridge those two pins by creating a connection between them. When I first got the device a week or so ago, there was green android when the device turned on. I feel the device is recoverable and feel I am close but am concerned there may be a hardware issue.
The software seems to have a failure rate writing the image to the card, of around 1 in 25 attempts, so start from the beginning if it doesn't work the first time. If it doesn't show any signs of life then you probably need to bridge the pins. You would see some images like you would see in recovery, like the android guy but with a spinning object in his chest, but you wouldn't be able to select any options or flash manually. Download the Ainol Stock Recovery and your Stock Firmware package. I would even get the battery charging symbol. Maybe I am fighting a losing battle.
When the tablet is done auto-flashing it will turn off. If for any reason something goes wrong, you will have to bridge the number 5 and 6 pins again and start over from the beginning. I am aware of the Quick Reference Manual. The size of the card should be the size of the. I can't teach you how to use your computer, so if you don't know how to uninstall or install windows drivers you'll have to spend some quality time with Google and then come back here.
I would suggest trying the sd card method again from scratch. Looks like fards did much of this thru linux. I have also had the screen light up a little but go dim and do nothing a couple of times. Flash your firmware package and reboot the tablet. Researching the issue, there is documentation of the process for other devices.
So I download the file , extracted it, and instead of starting ImageBurnTool. The software design is very last minute and not thought through in terms of recovery mode. There is some documentation of the process, but it requires a special image specific to the device. So I decided to look for alternative drivers, and found another version of the. While holding the thumbtack in place, press and hold the Power and Vol- buttons. Hi Fuser, A couple months ago your guide saved my life when I rescued my Crystal batch 1 from a deep brick. I have no expirence with jtag.
You must be using a real English version of Windows. I have another broken 8065 on the way bad display, touch ok. It looks to me like the errors that you are getting in recovery in the photo you posted are saying that there is firmware installed on the device, it checked the build. If all of that fails then you have two options, you can either try to force a hard brick and then start from scratch or you can look at the manual partition fixing section and start looking into whether or not your partitions or partition table is messed up. It also changed some permissions in the system, and it was not possible to restore the firmware the. This file is telling the tablet to automatically perform the wipes and to automatically flash the firmware package without you doing anything yourself in the tablets recovery.
If you used choice 1 or 3 above, the tablet should flash to 100%. I will use the donations to pay the monthly file hosting fees and other development costs. I don't think you need to worry about the tablet getting hot, especially when you get inside, you will notice things heating up. Hold down the Power and Vol - buttons until the screen turns on. The trick from the hero thread is to get the cpu in usb recover mode.